Wycked Wings - OOAK Artist Emporium

Gold and Silver options are for
the Filigree Harness
construction and will not be an
option on wire stem wings.
Wire stems will have wire
match the wing veining.

Please remember to indicate a harness if you
are ordering wings for a Barbie or other Ball
Jointed doll. If your doll is larger than the sizes
here, please email me.

Only indicate a metal finish for a harness.

ATTENTION
If you are making an 11 inch polymer clay doll, leave the
"Harness color" blank. Wings for Polymer clay dolls
have wire stems for inserting into the raw clay.

Wings for Barbie or vinyl dolls have a wing harness. Type
in either silver or gold for Harness color.

OOAK Artist Emporium - Fairy Wings

Do you need pre-made wings? Here are a few samples of wings made to order.
Please note, the examples are only a way to show the size and style of the wings.

Your creations, whether made of polymer clay or a Ball Jointed Doll (BJD) will look great
in custom wings. All of my wings are hand made to your specifications. I do my best to
accommodate any changes an artist would like. The wings will be slightly different from
the images shown, but the shape will be as close as possible, the tattered look will vary
on each pair.

Please Note:
BJD's come in many sizes. The 11 inch size refers to Barbie. I use the Tonner 16 in doll to fit my
large wings. Larger dolls will require more information. Gold and Silver options are for the
Filigree Harness construction and will not be an option on wire stem wings. Wire stems will have
a similar color wire to match the wing coloring.

Wings can take up to two weeks to create.

Click image to

ee more colors

Wycked Fantasy Fairy Wings

Back Store Policy

Luna Moth

Extreme Luna wings from the Sherry Goshon
wing kit. The image below is the sew on style.
These can be made for polymer clay
sculptures as well as ball jointed dolls. They
can also be sewn onto a permanent doll
costume. These wing are approximately 12
inches long, top to bottom. They are not
suitable for 6-8 inch dolls
Green color only

Regular Luna Moth wings. These wings
are approximately 7 inches long and the
bottom wings are a little wider.

Regular Luna wings are shown with
wires for inserting in polymer clay, but
can also be made with a harness or for
sewing on doll costuming.
Green color only

Exotic Luna wings are made from
Angelina Film. This style of wing has a
delicate look with the longer thinner tail
extensions. 7 inches long.
Exotic Luna wings can be made to attach
in any of the ways previously mentioned.
This type of wing can come in any color of
Angelina Film.

Polphemus (Silk Moth) Click image for larger view

Blue Morpho These are dramatic blue wings
trimmed in Teak and Black glitter and black
microbeads.
This image is from a real butterfly.
Blue only

Wings made of Iridescent Film

I offer 3 styles of Luna Moth wings. The first is Extreme Luna. This style is right for art dolls that are 12 to 15 inches tall. Regular
Luna wings are right for dolls 6 - 9 inches tall. The Exotic Luna size is for 6 - 9 inch tall dolls. Any of these wings can be modified to
fit your doll's height. All styles have Swarovski rhinestones on both sides of the wings. Extreme and Regular wings are textured
on both sides. 11 inch refers to Barbie size. 16 inch refers to Tonner size.

Gold and Silver options are for the Filigree Harness construction and will not be an option on wire stem wings. Wire stems will
have a similar color wire to match the wing coloring.

Vellum printed wings

______________________________________________________________________

Printed Transparency wings These wings are one sided. The image is clearly visible on both sides, but no iridescent film is used.
Wings are textured and decorated on both sizes. These wings are not available for 16 in and larger dolls.

Waterwings This style looks great as a
mermaid tail also! Many Swarovski rhine-
stones are used in a variety of blues and
aquas

Cicada Wings These are very real looking wings. Unlike real Cicada wings, these will not
deteriorate over time and they are larger to fit the proportions of your art doll. Cicada wings
are available in Natural (brown) and Teal (shown).

_____________________________________________________________________

Vellum offers a softer, pastel look to wings. The colors look more like paintings with soft flowing lines. Vellum is a translucent product
which will show the print on the opposite side, but will appear lighter in color. I treat the vellum prior to decorating to get maximum clarity.
Some wing patterns are decorated with Pearl Ex powders for the look of a real butterfly wing. Some are left showing the rich color of the
print. All wings are textured using a transparent glaze. They are not heavily textured like transparent wings. Swarovski rhinestones will be
used on some wing styles. The extension wires which are decorated with Swarovski beads add size without adding bulk. They give a
magical look to all wings they are used on.

_____________________________________________________________________

Metal Filigree is used to create the harness for BJD's.
It is available in a gold finish or silver finish.
Specifiy when ordering.

Butterfly Style

Barbie

Wings are for more than just dolls!
To see more adorable handmade
bears, visit Trish Pilon
The Squire's Bears

______________________________________________________________________

Victoria Stelenes, shown with harness. Wire
insert wings will be slightly different.

Dragon Lady Wings
Right out of a Sci-Fi story! I always wanted to do this! A hybrid of Dragonfly and Luna Moth
wings. The exaggerated long tails are a blend of webbed looking veins and the more
subtle tail wing of the Luna. The wings are decorated with Swarovski AB rhinestones and a
combination of different shades of greens, browns and black glitter, micro beads and
textured on both sides.

Completed wing as shown measures 7 inches wide from tip to tip and 8 inches in length
from top to bottom. Each wing section can be bent into position. Wing wire stems are left
long for custom trimming

Dragon Lady wings are transparent and have a very sensual look. This particular pair is
made for a Polymer Clay doll, but can be made for Barbie (11 inch) as well.

Click image for a larger view

Beads may vary with either round Czech fire
polished beads or Swarovski Bicone AB beads.

Wispy This set of wings was created for the
Pegasus sculpture pictured on the left.

I always try to get the proper proportions relative
to the size of the sculpture. This size and style
wing would also look great on a Fairy sculpture or
a Barbie doll. These would fit a doll 9- 11 inches
tall. The wing sections can be positioned
to be closer together as in the horse image, or
spread apart as in the larger image to the left.

Please specify the size of doll and if you want
the wire stems (for PC dolls), or harness (for
BJD's) and color of the filigree finish.

Gold and Silver options are for the Filigree
Harness construction and will not be an option
on wire stem wings. Wire stems will have a
similar color wire to match the wing coloring.

Midnight Confession
Goth Style

Dramatically dark with layers of iridescent black and blues.

Artist, Candace Taylor

Butterfly Style All of these wings are made using the same pattern. The green wings
show the size difference in the polymer art doll size (6-9 inch) and the Tonner (16 inch) Tyler
size dolls. Barbie would use a 8-9 inch size.

Barbie and Tonner wings will have a wing harness.

All available film colors can be seen on the Angelina Film page of this site.

Gold and Silver options are for the Filigree Harness construction and will not be an option
on wire stem wings. Wire stems will have a similar color wire to match the wing coloring.

Gold and Silver options are for the Filigree Harness construction and will not be an option
on wire stem wings. Wire stems will have black wire to match the wing veining.

Triple Extreme Cicada Wings

Three wing sections on each side of the doll. The wings are
elongated and still have a realistic look, but at the same time,
display the delicate wings a fairy would have.

Click image to see the back

New! Gothic Luna

The latest Goth wings are fashioned after
the Luna wings, but with an edgier look.
These wings have a special effect added
which allows me to make them darker like
the Midnight wings and still allow the base
iridescent color come through. This gives
the wings a webbed effect.

For BJD's, the harness will be a darker metal

Base color shown is Sugar Plum